Leading High-Tech
Lightning Protection
Manufacturer.
Equipped with China’s first fully automatic SPD production line and a 250kA lightning strike test station,
our products are certified by TUV, CE, and ISO, and exported to over 40 countries worldwide.
Lightning Protection Products
View all productsAC SPD
LT-10C Type 3 Surge Protector 10kA for Distribution Boards
LT-10C — OEM/ODM & Wholesale SPD Supplier Type 3 Surge Protector for Distribution Boards: the LT-10C is a Type 3 SPD that provides the final protection stage at the socket...
View moreProduct range
Surge Protective Device Categories
Type 1, Type 2 and Type 1+2 AC/DC surge protective devices for main distribution, sub-distribution and PV systems — pick a series to see its models.
Why Choose LEITAI
- 2010 Exporting Since
- 250kA Lightning Test Station
- 6+ International Standards
- 40+ Export Countries
What You Get When You Buy Factory-Direct
LEITAI builds surge protective devices in Liushi, Zhejiang, where MOV selection, thermal disconnection, moulding and final test all happen under one roof.
That factory runs China’s first fully automatic SPD production line, which keeps clamping voltage and response time consistent across a whole run.
Every design is verified against IEC 61643-11 on our own 250kA impulse current station (8/20µs) and 50kA lightning current generator (10/350µs).
Devices carry TUV, CE, CB, UKCA and CQC approval, and our management systems are certified to ISO 9001, ISO 14001 and ISO 45001.
We also build to your specification — private label and full ODM programmes, with tooling, moulding and marking handled in house.
LEITAI also sits on national lightning protection standards bodies and is President Unit of the Yueqing Lightning Protection Industry Association.
3 Reasons to choose LEITAI
-
Certified Protection Expert
High-tech manufacturer focused on lightning protection R&D, production and global sales.
Member of national lightning protection standards bodies with ISO 9001, ISO 14001 and ISO 45001 certifications. -
Advanced Testing Capacity
Full SPD, photovoltaic, signal and high-voltage arrester testing systems for IEC and national standards.
In-house lightning test station supports 250kA 8/20us and 50kA 10/350us current capacity testing. -
Trusted Worldwide
Products are exported to more than 40 countries and regions across Europe, Asia, America, the Middle East and Africa.
Wenzhou · Zhejiang · China
Own factory,
not a trading company
Since 2010 the whole SPD chain has run under one roof: injection moulding, PCB assembly, calibration and 100% routine testing before packing. No middleman stands between your purchase order and the line that builds it.
Visit the factoryAC · DC · Type 1 / 2 / 3
One series
for every panel
Type 1+2 for service entrances, Type 2 for distribution boards, Type 3 for terminal equipment, plus DC surge protectors for PV strings. From 40kA to 160kA, single and three phase.
Browse the range250kA · 8/20µs · 500kV room
Tested,
not just claimed
Impulse current up to 250kA (8/20µs) and 50kA (10/350µs) in our own laboratory, plus a 500kV high-voltage room for dielectric tests. Every batch leaves with its test record.
Ask for test reports40+ countries supplied
Your label,
our line
OEM and ODM built on 13+ years of export experience: your logo on the front, your model number on the side, your carton outside. 40+ countries already supplied from this plant.
Start an OEM projectGlobal Partner Network
LEITAI surge protective devices are chosen by partners in 10 key markets across North America, South America, Europe, Africa, Asia and Oceania.
- Partnerships
- Canada
- United States
- Brazil
- United Kingdom
- Germany
- South Africa
- India
- Russia
- Japan
- Australia
Exporting Since 2010
LEITAI surge protective devices now reach 40+ countries.
Distributors, panel builders and private-label brands order from the same line, and every batch ships with full traceability.
Certificate Display
Zhejiang Leitai Electrical Co., Ltd.

OEM & ODM Services
Empowering your brand with customized lightning protection solutions.
BLOG & NEWS
Simply follow our blog and news, and you’ll always be the first to knowabout the latest in electrical manufacturing — from product releases to industry breakthroughs.
History of Surge Protectors: From Horn Gaps to Modern SPDs
The story of Benjamin Franklin inventing the lightning rod by flying a kite during a thunderstorm is one that most of us have heard since...
Read More →What Happens If Lightning Strikes a House
A single lightning strike hitting a building consists of two different processes. A lightning bolt...
Read More →Type 3 Surge Protector: What It Is, and Where It Actually Goes
Type 3 surge protectors point towards the last layer of a surge protection system that...
Read More →A European Surge Protector Is Specified in Uc and Iimp, Not Joules
When one searches for a European surge protector, one will find two products. One of...
Read More →

















